Dentsply EasyPost Set (24 pcs)

Simple preparation procedure

• Simple preparation by central drilling with a tungsten carbide round bur (followed by progressive reaming with spreading drills and finishing with the corresponding EasyPost precision drill.

Biocompatibility

• EasyPost is certified as non-cytotoxic (ISO standard 0993-5). It is chemically inert and biocompatible.

Radio-opaque

• Visualisation and post-operative monitoring

Canal-adhesion

• EasyPost’s properties of chemical adhesion to the sealing and reconstruction composite render the presence of mechanical retention such as metallic pivots unnecessary.

Cylindrical-conical form

• DENTSPLY Maillefer’s wide experience with pivots enabled the development of pivot dimensions best adapted to the root canal anatomy, even to that of very small canals. The cylindrical part is easy to adjust in length using a diamond disc, and its slightly pointed extremity eliminates any piston effect when sealing.

Easy Post is a composite post reinforced with an epoxy resin matrix, which gives it the property of absorbing axial and transverse loads from chewing. Fiberglass provides hardness and translucency for the passage of the polymerization light and Zirconium gives it greater resistance. The modulus of elasticity of the post is similar to that of dentin and when cemented it chemically adheres to the walls of the root canal (dentin), thus minimizing the risk of root fracture

COMPOSITION :

• Zirconium-Enriched Glass Fibers 60%
• Epoxy Resin Matrix 40%

Flexure Strength : 1600 MPa

Length : 20mm

• 24 x EASYPOST
• 1 x Largo Peeso Reamer
• 2 x EASYPOST Precision Drill

• In case of insufficient residual tooth substance (< 4 mm), the EasyPost is needed to support the coronal restoration.
• Pre drilling with a Largo drill, no. 1 or no. 2, depending on the diameter (rotation speed 800-1200 rpm).
• Precision drilling with the calibrating drill, no. 1, no. 2, no. 3, or no. 4, depending on the case (1000-2000 rpm).
• Rinse and dry the canal.
• Check positioning in mouth. Please keep a dentine collar of at least 2 mm around the preparation.
• Draw the post outside the oral cavity using a diamond-tipped disc.
• Clean and condition the dentine walls with EDTA for 1 minute.
• Rinse with sodium hypochlorite then dry with air (multifunctional syringe) and large diameter paper points.
• Clean the post with alcohol.
• Adhere the tenon (silane does not need to be applied to the post): DENTSPLY Maillefer recommends using a compomer or composite luting cement such as Dyract Cem in conjunction with Prime & Bond + Self Cure. The post as well as the space and access cavity must be treated with Prime&Bond + Self Cure. Please follow the manufacturer’s instructions. The compomer or composite luting cement can be applied in the canal using a rotary paste filler (Lentulo).
• Insert the post in the canal: please apply some pressure to ensure maximum adhesion.
• Remove any excess.